CP7 Gas Training
The Weldfast (UK) Ltd Gas Inspectors Certification Course
The Weldfast (UK) Ltd Gas Inspectors Course is an intense two-day course covering all aspects of the gas inspections in accordance with the BCGA Code of Practice 7. It is recommended that potential inspectors have some prior knowledge of gas equipment before starting the course and a pre reading pack sent out prior to starting the course.
The course content includes developing knowledge on key UK Industrial Regulations that cover working with industrial gases and the reasoning behind there is a need to complete formal gas inspection. The course briefly goes through how EU laws affect us here in the UK and identifies the manufacturing standards for each piece of Gas Equipment. During the first day, delegates complete a risk assessment in accordance with Management of Health & Safety Regulations 1999 and the resulting assessment is placed within their own inspection folders. During this session, we develop knowledge on the Classifications of Gases, identifying the main Oxy/Fuel equipment components – describing how each works and how to visually inspect them for serviceability. Finally, inspectors complete with some revision on lighting & closing down a flame and the correct way to close down a system at the end of their daily process. They also go through the correct emergency procedures when something has gone wrong. At the start of the day’s activities each delegate will receive various HSE handouts to aid them with further revision.


The second day starts with some light revision of the previous day ‘s activities, followed by a demonstration of a complete inspection of an Oxy Fuel system. Inspectors are then observed carrying out their own practical inspection using course guidance notes. There is a further assessment utilising faulty equipment and other various demonstrations. At the end of the 2-day package, delegates are expected to complete a written question paper.
Once qualified, all delegates receive an Inspector’s Identity card, an Inspection folder and a gas inspection toolbox. Weldfast recommend that delegates annually requalify to keep updated with all current UK Codes of Practice and the gas equipment manufacturing standards. The Annual Re-Certification course is a one-day course.
If you have any further questions regarding this course, then please contact Paul Cadman on 07508 316155 or by email paul.cadman@weldfastuk.co.uk
MonMonday | TueTuesday | WedWednesday | ThuThursday | FriFriday | SatSaturday | SunSunday |
---|---|---|---|---|---|---|
December 28, 2020 | December 29, 2020 | December 30, 2020 | December 31, 2020 | January 1, 2021 | January 2, 2021 | January 3, 2021 |
January 4, 2021 | January 5, 2021 | January 6, 2021 | January 7, 2021 | January 8, 2021 | January 9, 2021 | January 10, 2021 |
January 11, 2021 |
January 12, 2021
All day: 1 day Recertification CourseJanuary 12, 2021 All day Weldfast Holditch Rd Chesterton Newcastle-under-Lyme, Staffordshire ST5 7PL 01782 566553 |
January 13, 2021 | January 14, 2021 | January 15, 2021 | January 16, 2021 | January 17, 2021 |
January 18, 2021 | January 19, 2021 | January 20, 2021 | January 21, 2021 | January 22, 2021 | January 23, 2021 | January 24, 2021 |
January 25, 2021 | January 26, 2021 | January 27, 2021 | January 28, 2021 | January 29, 2021 | January 30, 2021 | January 31, 2021 |